C D S   TEMPERATURE   SWITCH   WELLS

A WELL is used when undesirable loss of fluid or pressure may result when the Temperature Switch is removed from its installation. The WELL is installed in the wall of the pipe or pressure vessel,

and the C D S Temperature Switch, having 1/8" NPT threads, is installed in the WELL. The use of a WELL will not change the switch setting, but it may slightly delay the action.
Size
1/4" Well
1/4" Well
3/8" Well
3/8" Well
1/2" Well
1/2" Well
3/4" Well
3/4" Well
External Threads
1/4"-18 NPT
1/2"-14 NPT
1/2"-14 NPT
3/4"-14 NPT
Hex for Installation
5/8" External
3/4" External
1/2" Internal
1/2" Internal
Overall Length
1.00"
1.00"
1.00"
1.00"
Brass WELL

Part No.
192

Part No.
266
Part No.
142
Part No.
275
303 Stainless Steel WELL
Part No.
245
Part No.
267
Part No.
271
Part No.
276
Home Page +  C.D.S. Products  +    Oil Level Gauges  +  Temperature Switches   +    Oil Pessure Switches   +   Contact Page
C D S PRODUCTS   P.O.   Box 96   Newport Beach,   CA    92662
   800.77.CDS.77     FAX 562.928.9928      www.cdsproducts.com
C  D  S    =    Certifiably   Dependable   Switches    =    C  D  S